Product Description
MCL930 ZL930 Mini Articulated Wheel Loader 0.9m³ Bucket Capacity 3200mm Lifting Height Compact Wheel Loader
1. Specifications
| Machine operating weight |
3700kg |
battery capacity |
60A*2 |
| Bucket capacity |
0.9m³ |
engine model |
YUNNEI27GBZ |
| Bucket Rated Loading Weight |
1800kg |
maximum torque |
206N.M |
| Largest traction |
35KN |
rated power |
42KW |
| maximum digging force |
45KN |
Rotating speed |
2400r/min |
| maximum tilt angle |
30° |
fuel consumption |
5L/H |
| Maximum unloading height |
3200MM |
steering angle |
35° |
| Maximum dumping distance |
850mm |
Minimum turning radius |
4500mm |
| Dimensions (mm) |
5300*1850*2650mm |
Lifting speed |
5S |
2. Procuct Description
01 Hydraulic hose
Bold hydraulic oil pipe ,smooth and powerful operation ,no oil leakage .
02 Brand engine
High horsepower brand diesel engine,strong power ,low fuel consumption ,fuel saving
03 Bigger bucket
Thickened and enlarged bucket ,not easy to corrode and rust ,and other accessories can be replaced.
04 Widened tires
Slot design is non-slip and durable ,thickened tire walls are made of high-quality materials.
05 Stronger Steel sleeve
In terms of pins and bushings, they are like the joint in human. There are many connecting bushing parts needed in a loader.Please take a look at this picture, these are three types of bushings, nylon type, compound type (copper coating inside), and steel type.
06 Bigger size of differential
some manufacturers cheat their customers by doing that. For example, the inside of the large axle shell is actually the teeth of the medium differential, and the inside of the medium shell is actually the differential of the small axle. In these combinations, the gap between the shell and differential is relatively large, and it is only suitable for running on smooth road and job site, and it is not suitable for loading heavy goods.
3. Attachments
4. Production line management
The cutting of the steel plate is closely related to the drawing design, workers' technique and cutting equipment.
Normally there are three types of cutting machines, you can see from the pictures here.
Frame cutting is used for iron plates over 40mm thick.
While plasma cutting is for steel plate that in between 20-40mm.
Laser cutting is for steel plate between 8-20mm.
It is great for cutting that requires high precision. For example, cutting steel components for bumper, hood, and driver's cab. The advantages of laser cutting are: low temperature, so the plate is not likely deformed; the disadvantage is that it consumes a lot of power.
5. Package and delivery
1. Tool box put in the loader
2. Seat and control panel warp in PVC
3.Warning light put in the loader
4.Drive the loader inside the container
5.Place a triangle wood in front of the tyre
6.Stablize the loader with rope
7.Close and seal the door ready for shipment
8. 3 sets MCL ZL926 930 932 in one 40HQ
9. 2 sets MCL ZL936 940 in one 40HQ
6. Why choose us
1. Brand new machine
Ten units will be given away if any used machines or refurbished parts are found.
2.Lower replacement rate
The spare parts hence less complaint come from users.
3.Delivered Within 7 days
General configuration loaders can be delivered within 7 days.
4.Certificates:
CE ISO standard is the good garranty of quality.
Your message must be between 20-3,000 characters!