Product Description
Mini Front End Loader Yunnei Engine 490 Supercharged 58kw Unloading Height 3200mm For Agriculture And Construction Application
1. Specifications
| Machine operating weight |
3700kg |
battery capacity |
60A*2 |
| Bucket capacity |
1.0 m³ |
engine model |
Yunnei 490 Supercharged |
| Bucket Rated Loading Weight |
1800kg |
maximum torque |
206N.M |
| Largest traction |
35KN |
rated power |
58KW |
| maximum digging force |
40KN |
Rotating speed |
2400r/min |
| maximum tilt angle |
30° |
fuel consumption |
5L/H |
| Maximum unloading height |
3200MM |
steering angle |
35° |
| Maximum dumping distance |
650mm |
Minimum turning radius |
4500mm |
| Dimensions (mm) |
5300*1820*2670mm |
Lifting speed |
5S |
2. Procuct Description
01 Hydraulic hose
Bold hydraulic oil pipe ,smooth and powerful operation ,no oil leakage .
02 Brand engine
High horsepower brand diesel engine,strong power ,low fuel consumption ,fuel saving
03 Bigger bucket
Thickened and enlarged bucket ,not easy to corrode and rust ,and other accessories can be replaced.
04 Widened tires
Slot design is non-slip and durable ,thickened tire walls are made of high-quality materials.
3. Attachments
4. Production line management
A complete production process mainly includes: material procurement-steel plate cutting-welding-spray painting -drying-assembly-inspection. Let's start with the step of purchasing materials.
How does our company control the quality of material procurement? We have two conditions.
1. For the parts that can be inspected on site, our company has a dedicated quality inspector, such as whether the cylinder is leaking, these can be found out on site, and only qualified parts can be put into the warehouse;
2. For conventional parts, the monthly defective product rate should be less than five in every 1000 parts, if it exceeds, our company sign a punishment agreement with our suppliers. If it exceeds 1%, we will pay $150 less to our supplier, if defect rate exceeds 2%, we will be deduct $300, if it exceeds 3%, we will pay $600 less, and it will double in turn.
5. Package and delivery
The inspection is as important as any other procedure. Our technicians usually need to inspect the following parts:
-
Adjust the tyre pressure, drive the loader to the inspection platform, to see if the bucket is level to the ground when it is on the ground
-
Check if the hydraulic oil is enough, and then lift the arm, withdraw the bucket and check the hydraulic oil level again, check the hydaulic oil tank scale (scale at 11 to 13 means enough)
-
Check if any bolts are loose or missing, and if there is a oil leaking problem
-
Check the track width to see if it is different from standard
-
Check the meters reading on dash board inside the cab. Including brake pump pressure: 0.4-0.8; lub oil pressure: 0.2-0.6; water temperature: check if it is too high after the testing; torque converter pressure: 2.2-2.4 (at full load and step heavily on the accelerate pedal.
-
Check if head light, tail light, on and off switch of different functions, and radio operating normally, if electric wires are exposed
6. Why choose us
1. Brand new machine
Ten units will be given away if any used machines or refurbished parts are found.
2.Lower replacement rate
The spare parts hence less complaint come from users.
3.Delivered Within 7 days
General configuration loaders can be delivered within 7 days.
4.Certificates:
CE ISO standard is the good garranty of quality.
Your message must be between 20-3,000 characters!