Product Description
MCL932 ZL932 Mini Articulated Wheel Loader Operating Weight 3700kg Compact Wheel Loader Mini Construction Machines
1. Specifications
| Machine operating weight |
3700kg |
battery capacity |
60A*2 |
| Bucket capacity |
1.0 m³ |
engine model |
Yunnei 490 Supercharged |
| Bucket Rated Loading Weight |
1800kg |
maximum torque |
206N.M |
| Largest traction |
35KN |
rated power |
58KW |
| maximum digging force |
40KN |
Rotating speed |
2400r/min |
| maximum tilt angle |
30° |
fuel consumption |
5L/H |
| Maximum unloading height |
3200MM |
steering angle |
35° |
| Maximum dumping distance |
650mm |
Minimum turning radius |
4500mm |
| Dimensions (mm) |
5300*1820*2670mm |
Lifting speed |
5S |
2. Procuct Description
05 Stronger Steel sleeve
In terms of pins and bushings, they are like the joint in human. There are many connecting bushing parts needed in a loader.Please take a look at this picture, these are three types of bushings, nylon type, compound type (copper coating inside), and steel type.
06 Bigger size of differential
some manufacturers cheat their customers by doing that. For example, the inside of the large axle shell is actually the teeth of the medium differential, and the inside of the medium shell is actually the differential of the small axle. In these combinations, the gap between the shell and differential is relatively large, and it is only suitable for running on smooth road and job site, and it is not suitable for loading heavy goods.
07 Higher rubber content of tire
For small loaders, the first-tier factories in China use tires with 35-40% of rubber; while the tires of second tied factories have 20-30% or less rubber inside. Our company use tires with 38-40% rubber. Between 30-40%
08 Better Spay painting
The quality of paint is mainly reflected in the protective ability and adhesion of paint. Professional testing facilities have many methods for testing adhesion.
On any 1*1cm painted surface on the loader, draw the grid with a blade. There are many quality standards.
If the paint quality of the Chinese loader is good. You can paint 30 grids without chipping, and like Caterpillar, you can paint 100 grids without chipping.
3. Attachments
Auger with reduction modor ,hydaulic breaking hammer ,dozer blade with steering ,snow blade with steering,grab bucket.etc.
4. Production line management
Our factory has 4 flame cutting machines, 6 plasma cutting machines, and 4 laser cutting machines.
There are large and small models. The large model is used to cut bigger pieces,and the smaller model is used to cut smaller pieces.
When the steel sheet is uneven or the cutting speed is not steady, a melting point or breakpoint will form; so during the cutting process, workers need to go back and forth to check.
It's obvious that you make drawings and layouts first, and then machines do the cutting . What we are talking about here is not about this, but the relationship between drawing design and cost saving.
Many factories that will weld the scrap into a whole piece. After polishing and painting, the appearance look the same as a whole piece, but on quality stand point, the welded piece has less intergrity than the whole-board cutting piece, because the welded plate is easily broken after being stressed.
5. Package and delivery
1. Tool box put in the loader
2. Seat and control panel warp in PVC
3.Warning light put in the loader
4.Drive the loader inside the container
5.Place a triangle wood in front of the tyre
6.Stablize the loader with rope
7.Close and seal the door ready for shipment
8. 3 sets MCL ZL926 930 932 in one 40HQ
9. 2 sets MCL ZL936 940 in one 40HQ
6. Why choose us
1. Brand new machine
Ten units will be given away if any used machines or refurbished parts are found.
2.Lower replacement rate
The spare parts hence less complaint come from users.
3.Delivered Within 7 days
General configuration loaders can be delivered within 7 days.
4.Certificates:
CE ISO standard is the good garranty of quality.
5.MCLLROY has established long-term strategic cooperation with many local distributors.
Your message must be between 20-3,000 characters!